INFORMATION
Excellent resistance to chemicals
- Can also be used in critical areas in which the seal comes into contact with various liquids
- Outstanding resistance to engine oil and transmission oil, refrigerant and anti-freeze agent
Non-acidic hardening system
- Non-corrosive, therefore has no negative impact on electronic components and on lambda probes
Sealant in compressed-air can
- Easy to dispense without additional aids
- The fine beads allow the product to be applied uniformly
When sealing e.g. oil pans and gearboxes it is vital that no sealant gets into the interior. For this reason we recommend to apply the sealant on a joining part surface. Join both parts and then carefully press by hand and lightly slide against each other. Afterwards separate the parts again and then remove the sealant that has gone inside. Join the components again within a max. of 5 minutes and tighten firmly. Before commissioning, observe the hardening time (depending on the sealant thickness).
The usage instructions are recommendations based on the tests we have conducted and are based on our experience; carry out your own tests before each application. We do not assume any liability for a specific application result due to the large number of applications and storage and processing conditions. Insofar as our free customer service provides technical information or acts as an advisory service, no responsibility is assumed by this service except where the advice or information given falls within the scope of our specified, contractually agreed service or the advisor was acting deliberately. We guarantee consistent quality of our products. We reserve the right to make technical changes and further develop products.
ABOUT WURTH
The Würth Group is the global market leader in the development, manufacture and sale of assembly and fastening materials.
Quality is a decisive factor for any company in maintaining and increasing its competitiveness. Customers decide quickly whether the quality of a product and the performance of a supplier deserve their trust.
That’s why every product that Würth develops or releases for the market has been rigorously tested to our exacting standards and specifically designed to deliver a real solution for your business
By purchasing from us you are agreeing to our terms of service which can be found at: https://www.mazspec.co.uk/policies/terms-of-service. Please note, 99% of our product pages use the correct images, in some instances, a generic image may be used but the parts sent to you will be the parts which corresponded with the description / vehicle fitment information or part number.