INFORMATION
Preparing your chassis for underseal? - Want to stop the corrosion process? - Undertaking a restoration?
Need a solution for all chassis / body as well as subframe, wishbones / arms, wheels and brake calipers?
Wurth Rust Converter is the highest quality surface preparation fluid prior to painting.
Highest quality, best performing, environmentally friendly dispersion-based rust converter, used by professionals in the trade.
Can be filled over, or painted over with all commercially available top-coat paint systems after 3 hours
Reliably stops the corrosion process and provides an optimised application surface for additional paint work.
How to use:
- The surface must be clean, dry and free from grease
- Remove dissolved rust, paint and dirt with a wire brush, scraper etc.
- Apply a thin, even coat with a brush or roller and prevent runs
- Paint within 48 hours
- Observe the reaction times
- Mask off surfaces not to be treated
Notice:
Do not wash treated surfaces with water. Immediately wash the rust converter off painted surfaces. Do not use in direct sunlight, on hot surfaces over +40°C and when there is risk of frost. Protect from frost. Clean the equipment with water after use.
The usage instructions are recommendations based on the tests we have conducted and our experience; carry out your own tests before each application. Due to the large number of applications and storage and processing conditions, we do not assume any liability for a specific application result. Insofar as our free customer service provides technical information or acts as an advisory service, no responsibility is assumed by this service except where the advice or information given falls within the scope of our specified, contractually agreed service or the advisor was acting deliberately. We guarantee consistent quality of our products. We reserve the right to make technical changes and further develop products.
ABOUT WURTH
The Würth Group is the global market leader in the development, manufacture and sale of assembly and fastening materials.
Quality is a decisive factor for any company in maintaining and increasing its competitiveness. Customers decide quickly whether the quality of a product and the performance of a supplier deserve their trust.
That’s why every product that Würth develops or releases for the market has been rigorously tested to our exacting standards and specifically designed to deliver a real solution for your business
By purchasing from us you are agreeing to our terms of service which can be found at: https://www.mazspec.co.uk/policies/terms-of-service. Please note, 99% of our product pages use the correct images, in some instances, a generic image may be used but the parts sent to you will be the parts which corresponded with the description / vehicle fitment information or part number.